Tuesday, December 15, 2009

some more gear for sale

4AGE small port head

shaved & ported, high flow valves with a 3 angle job, 9000rpm rated springs, crack tested, and a general reco, never used! VRS gasket kit including valve stem seals, head overhaul bolt kit, comes with bigport cams, cost me $1500 to build, all good gear, but lost the reciept so can't remember what brand of valves, springs ect ect were used, I know the guy spent over 10 hours porting it and has done 4age's since he started back in 1988.

$800
NOT NEG!




Mag wheels & tires

ROH something 14x5 or 5.5 I think, 4x100 PCD, maybe + 20 offset, your standard front wheel drive offset, Tires are about 50 to 70%, very road worthy! good sticky tires as well! Bridgestone Turanza ER592They're not a super performance tire but they would see you stick to the road more than your average tire, and I reckon they're getting better with age
I'm missing 2 center caps, but I reckon they look better without them

$200!!!



Mag wheels & tires

Bathurst Globes 14x5.5, 4x114.3 PCD, my mate reckons they're +12 offset, they don't quite fit on a KE70 but would if you had spacers, came off a Toyota lite ace I think, they have BRAND NEW NEVER DRIVEN ON YOKO & SIMEX TIRES!!!!!!! these are good tires! I got them cheap and they still cost me $500 I'll get the details and pics up tomorrow night.

$500!!!




LOTS OF MOTOR BIKES!!!

1 x 125 pitpro
1 x 140 pitpro
1 x 200 maxis
1 x offroad buggy
1 x 1980 XT250

I want to swap all these things for a real bike plus cash adjustment your way I'm looking for a 2 stroke 250cc, was thinking Suzuki RMX.... but will consider anything you have to offer.

125 runs perfect but has flat front tire.
140 runs perfect but has seen some heavy use and is starting to show cosmetically.
200 runs perfect, electric start, I beleive road registrable, but has been used in the bush so cosmetically average.
Buggy will run with some work, has an old RM100 motor, and will scar the shit out of you when going, needs muffler & kick start. I think it just needs a tune, I had it idling a couple of months ago but would stall when put in gear, mate f**ked with the carby and now I can't get it going again, but goes really well when going.
XT250, I found the old girl down the back of the farm in a shed we don't use, seen better days! the story I was told was the previous owner had a bad accident and hit a tree, and the bike was never used again. front is a little off, rear swing arm is bent, missing exhaust, and spark plug lead, I was going to try and get it going for the farm but it needs to much work I can't be bothered putting in. I have been assured by friends of the previous owner that it will run, and was running fine when dumped in the back shed, it's just not pretty to look at.

I will pay $1000+ and all the above for the right bike.



will separate if requited, No pics of the Maxis 200 yet


Saturday, June 20, 2009

KE70 Project, build 1 out of 2!

I'm selling 2 KE70 Corolla's as a project as one has good running gear and interior but a rusty body and the other one has a smokey motor, no interior, but good body.

so if you have the time and space you can have a clean KE70 Corolla for a bargain price!

some of the hard work has already been done for you and I will chuck in a couple of spars I have lying around, you don't need to buy anything else, as between the 2 cars you have everything you need!

and if you're interested I have a set of wheels I'm selling separately with brand new Yokohama rubber wrapped around them, tires cost me over $500 and have never been driven on! 13x6 genuine Bathurst globe mag's. they have a fwd offset so you will need to use spacers if you want to run them on a KE70

Ke70 XX model

Pro's
4k 1.3 ltr motor in very good condition
K50 5sp Manual transmission in good condition
Full XX interior in near perfect condition! looks like new
strong diff, no whining or noises at all
previous owner was an old lady that took it for a service every 6 months regardless of how many k's it had done!
still has original factory tape player!!!

Con's
Body is VERY rusty
has no front panels


Ke70 CS model, Slant front.

Pro's
Good body, little to no structural rust.
runs and was drivable when I purchased it
interior has already been removed

Con's
4k motor is smokey
Auto plays up
Brake booster is faulty (pedal sinks to the floor with very little braking force)
some small dents in the rear passenger door
Front drivers side corner indicator has been broken (new lens)
comes with standard wheels, (wheels in pictures NOT INCLUDED)




I'm only asking

$1000

you can contact me via email

blacktopspirit@hotmail.com

Monday, January 5, 2009

Toyota Landcruiser FJ60 hub nuts and bolts

4 wheels nuts and 2 hub bolts

$5 + postage